Hey Folks,
I am selling my nearly new (has about 20-30 flights) 3D Hobby Shop Extra 300 SR. This is a 47" wingspan plane designed for either aggressive sport flying or 3d. It is also a very easy to fly plane on low rates. It can be flown on either 3s or 4s 2000mah - 2500mah LiPo batteries. It is an excellent flyer but must go to help fund my next plane. There is tons of information about this plane on RC groups at the this thread. This plane is in excellent condition. The only flaw is that I have repaired one of the landing gear legs with Kevlar Thread and CA. It is actually probably stronger than the un-repaired side now. The equipment in the plane and new prices (with links for descriptions) are given below:
3d Hobby Shop Extra SR Airframe $175 http://www.3dhobbyshop.com/detail.aspx?ID=2277
Torque 2818 Motor $75 http://www.3dhobbyshop.com/detail.aspx?ID=1627
Airboss Elite 45 amp Speed Controler $90 http://www.3dhobbyshop.com/detail.aspx?ID=2234
4 hightec HS-65MG Servos $140 http://www.3dhobbyshop.com/detail.aspx?ID=2291
3d Hobby shop Servo Arms $11 http://www.3dhobbyshop.com/detail.aspx?ID=2193
Total $491
I am asking $350 for the plane in receiver ready condition (all equipment listed above). Alternatively, I will sell just the airframe for $120. Will leave it posted here for a week or so in case one of my fellow Flagstaff Flyers is interested. If no bites, I will post on RC Groups to look for an interested pilot in Phoenix.
See attached pictures (I can provide higher resolution upon request) and let me know if you have any questions.
Lew Coggins
928-699-7634 |
